CTZN(7m) 디저털 전도도 전극 RS-485 Inductive Conductivity

· 센 서 구 성

(1) NTC Temperature sensor 

(2) EPDM Head of body

(3) PVC Sensor body with measurement electronics 

(4) Cable bushing 

(5) Securely connected connection cable

· 센 서 크 기

DIMENSIONS – VERSION IMMERSION/INPIPE PVC INSTALLATION 

DIMENSIONS – VERSION INPIPE STAINLESS STEEL INSTALLATION

Accessories for PVC pipe-mounting.

Every system of assembly is delivered with an adapter (and the appropriate joints) and one T of assembly (90 ° for CTZN sensor) to stick on a 90 mm diameter pipe. Its special design type ensures the correct inflow to the sensor, thus preventing incorrect measurements. 

Please note the following when planning your piping set-up: 

• The fitting must be easily accessible to allow the sensor or the fitting itself to be maintained and cleaned regularly 

• We recommend bypass measurements. It must be possible to remove the sensor through the use of shut-off valves 

• When working with systems involving pressure and/or temperature, ensure that the fitting and sensor meet all relevant requirements 

• The system designer must check that the materials in the fitting and sensor are suitable for the measurement (chemical compatibility, for instance)

 Mounting system for CTZN sensor (PF-ACC-M-00001)

1 Unscrew the union nut (2) from the PVC flow fitting (3). 

2 Guide the sensor cable through the union nut on the fitting. 

3 Insert the sensor (1) into the fitting as far as the position shown in the middle image above. 

4 Screw the union nut onto the fitting as far as the stop.